|
|
FreeCADFree Software Foundation, Inc.
|
Bull bar mount for Light Bars V2
This is a bull bar mount i designed to attach to the top bar and mount up to 2 light bars underneath.
Inner diameter is 50mm and will work with smaller bars if you use rubber when mounting.
light mounting plates are 200mm total length, with no hole drilled so you can place your light bars where you want.
i can adjust the mounting whole size and light bar mounting plate length as required.
Bull bar mount for Light Bars V2
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Glenn Matthews
-
Programmable Mist Maker - XIAO / QT PY Extension
1822 2 2 -
RadioHAT - Raspberry Pi radio development platform
1557 0 3 -
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3787 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4536 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
5341 2 2 -
