|
KiCADKicad
|
CAN Bus Multi Mix Board
Multiplies the amount of available D-SUB 9 CAN bus connectors of CAN-to-USB Hardware. Nicely fits to PEAK PCAN-USB Pro and VECTOR CANcaseXL. Suitable for up to 4 CAN channels (Vector hardware only).
120R terminition selectable via jumper.
Both sides CAN 1 and CAN 2 can be connected via jumpers. This is very helpful in sutiations, where data acquisition and ECU calibration are running at the same time.
LIN supported.
CAN Bus Multi Mix Board
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(4)
More by Manfred manni_5000
-
Programmable Mist Maker - XIAO / QT PY Extension
1149 2 1 -
RadioHAT - Raspberry Pi radio development platform
957 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3382 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
3998 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4389 2 2
