Bottom
Top
Blip! - The LED flasher.
Micropower LED flasher
Powered from 3V (e.g. CR2032 or other 3V coin cell) via J1 (square pin is pin 1 - positive).
LED is through hole (for best results use a low current led e.g. Vishay TLLK4401).
Square pin of LED1 is anode.
Flash duty cycle is 10.5ms/1.4s = 0.75%
Power consumption estimate calculations given in schematic.
Resistors ideally should be 1% although BAW56 double diode does contribute to imprecise on-time.
Schematic is in svg format file at Google Drive link.
Blip! - The LED flasher.
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Bill E Bodge
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
161 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1021 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
585 0 1 -
Programmable Mist Maker - XIAO / QT PY Extension
3052 2 3 -
RadioHAT - Raspberry Pi radio development platform
2603 0 4 -
-
-
