Bottom
Blinka Pin
Blinka is the mascot of Adafruit's CircuitPython. This PCB is not really functional — it's just for looks. It has a large round pad in the middle on one side, so that you can solder a pin in that place, and wear the board as decoration.
Blinka Pin
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(1)
- Likes(0)
More by Radomir Dopieralski
-
Blinka Pin
Blinka is the mascot of Adafruit's CircuitPython. This PCB is not really functional — it's j...
-
Rainbow Jellyfish
### DESCRIPTIONIt's just a bunch of colorful LEDs on a printed circuit board, with wires suitabl...
-
Kubik M0 Spider Robot
DescriptionIt's 2018 and there are still no small automatic robots scurrying around and doing al...
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
165 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1026 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
589 0 1 -
Programmable Mist Maker - XIAO / QT PY Extension
3056 2 3 -
RadioHAT - Raspberry Pi radio development platform
2605 0 4 -
-
-
