This is the HOLY ESC !

It is a BACK EMF Based ESC featuring a *wonderful* blue solder mask and a STM32F051 MCU able to run AM32, a field-test ESC firmware so you can play around with the design, adapt it or just order it on the spot !

I presented it on YouTube (BRH Channel) and this project is sponsored by PCBWAY itself !

Note this ESC is a project meant for educational purposes. Even tough it was sized for high current load between 20-30 Amps, it was not tested on high load applications like a drone !

I ordered the HOLY ESC, now what do I do ?

If you order this ESC, it will come completely blank. You'll need to flash an ESC firmware on it using SWD.

The easiest way is to use a STLINK V2 (any clone will do the trick) and to load:

• A bootloader
• A AM32 Specific Build

At specific addresses using the STCUBE software.

No worries, this is not that complicated and all the files and procedures are on github : https://github.com/0BAB1/HOLY_ESC

(The GitHub will be updated on the video upload. If you see no procedure, wait a few days as the video is not yet uploaded).

if you need any support, opening an issue on github will make you entrer in direct contact with me so I can trouble shoot you.

ENJOY !