Atari 2600 8K / 16K / 32K Activision Bankswitch Cartridge
Features:
- Create 8K, 16K and 32K Cartridge games for the Atari 2600 system.
Supports standard Atari F8, F6 and F4 bankswitching schemes.
Uses easily available, off-the-shelf components.
Fits into standard Atari 2600 cartridge cases.
Build new Atari 2600 games without modifying old cartridge circuits.
Bill of Materials:
U1 - 27C64 or 27C128 or 27C256 - EPROM (with game binary) CMOS OK, 100nS - 250 nS.
U2 - 20V8 Complex programable Logic Device (PLD) - Recommended Device: Atmel ATF20V8B, 24-pin DIP (Must be programmed)
C1 - 0,1uF Ceramic - Bypass capacitor (104) axial leads.
C2 - 100pF Ceramic - Time delay capacitor (101) axial leads.
R1 - 2.2K ohm resistor, 1/8W - Time delay resistor (red-red-red)
PCB - Atari 2600 Bankswitch PCB - This PCB.
Atari 2600 8K / 16K / 32K Activision Bankswitch Cartridge
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(5)
- Likes(7)
- 1 USER VOTES
- YOUR VOTE 0.00 0.00
-
10design
-
10usability
-
5creativity
-
10content
-
Necroware S7-VRM (2024 Version)
Note from PCBWay: There are some problems in the BOM on the project page that cannot be resolved. If...
-
Atari 2600 PlusCart
Original Site: https://gitlab.com/firmaplus/atari-2600-pluscart
-
2 digit Turbo Display
Original GITHUB: https://github.com/wiretap-retro/2-digit-Turbo-Display?tab=readme-ov-file#2-digit-t...
-
TRH9000 - a graphics expansion cartridge for MSX
Original GITHUB: https://github.com/cristianoag/trh9000
-
SD-1000 - Sega flash multicart for SC-3000, SG-1000 and Mark III based on Pico Clone
Original GITIHUB: https://github.com/aotta/SD-1000
-
PiCOLECO - a Colecovision flash multicart based on Pico clone
Original GITHUB: https://github.com/aotta/PiCOLECO
-
Pi-RTO II - a Intellivision flash multicart based on Pico clone
Original GITHUB: https://github.com/aotta/PiRTOII
-
PicoPAC - Flash Multicart for Philips Videopac (Magnavox Odyssey 2)
Original GITHUB: https://github.com/aotta/PicoPACMore info: https://www.nightfallcrew.com/22/09/202...
-
PicoMSX (Pico MSX Not MSXPico)
ORIGINAL GITHUB: https://github.com/Chandler-Kluser/picomsxThis project is on development by his aut...
-
MSX Goauld Rev. 4.1
Original GITHUB: https://github.com/jabadiagm/MSXgoauld_tn20k
-
Atari 7800 Mini Ultra Rev. D Game Cart
Please see the AtariAge forum: https://forums.atariage.com/topic/69710-the-7800-cartridge-board-thre...
-
286 Booster from Necroware
Original GITHUB:https://github.com/necroware/287-boosterCredits to Necroware.
-
MSX SD Mapper v2
ORIGINAL GITHUB: GitHub - fbelavenuto/msxsdmapperv2: MSX SD Mapper Interface V2
-
Atari 2600 & 7800 Pico Cart Nightfall Version
Original Website: https://www.nightfallcrew.com/17/01/2025/picoa10400-flashcart-for-atari-2600-7800/
-
Atari XE FULL RA Cart / ECI Extender v2.0
TESTED AND WORKING PERFECT.
-
Atari 1200XL Extender Cart
Original Website: https://www.bitsofthepast.com/cartridgeboards.html#
-
Atari 1200XL RA Extender ( Angle Cart )
Original Website: https://www.bitsofthepast.com/cartridgeboards.html#
-
Atari XE ECI port to XL PBI Angle Cart
Original Creator and Website: https://www.bitsofthepast.com/PBI_ECIBoards.html#ATTENTION: This proje...
-
-
-
-
Tester for Touch Screen Digitizer without using microcontroller
240 2 2 -
Audio reactive glow LED wristband/bracelet with NFC / RFID-Tags
241 0 1 -
-
-
