|
|
0022053021Molex
|
x 1 | |
|
|
PPTC172LFBN-RCSullins Connector Solutions
|
x 1 | |
|
67997-234HLFAmphenol ICC (FCI)
|
x 1 |
|
OrCad Cadance |
Amiga DFO and External Floppy Swapper v2.1-b (floppy side)
This module can swap an internal DF0: drive with an external DF1: floppy drive in order to boot from an external device, such as a Gotek Floppy Emulator.
First module (other) fits under the MOS 8520 Even CIA.
Second module (thus one) is inline with the internal DF0: drive. (See other project)
A small CPU detects two fast consecutive resets (CTRL-A-A twice). This will activate or deactivate the floppy swapping.
A piezo will emit sounds when the swapping is activated or deactivated.
This device will fully support external booting from any 880K disks, while still permitting the use of internal DF0: as DF1: (hardware fix)
Amiga DFO and External Floppy Swapper v2.1-b (floppy side)
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(3)
More by Francis Retronic Design
-
Amiga Stereo Audio Digitizer v1.3
This board can convert one or two audio channel to uncompressed digital 8-bit audio stream.It connec...
-
Amiga DFO and External Floppy Swapper v2.1-b (floppy side)
This module can swap an internal DF0: drive with an external DF1: floppy drive in order to boot from...
-
Amiga DFO and External Floppy Swapper v2.1-a (mainboard)
Note from PCBWay: This is the link for main board, for floppy side, please check Amiga DFO and Exter...
-
Amiga External Floppy Adapter v1.3
This board allow to connect all type of floppy drives to the Amiga external D-Sub 23 floppy connecto...
-
Amiga Serial Midi Adapter v1.3
A simple MIDI interface for Amiga computers.Compatible with most Amiga Midi softwares.It simply conv...
-
-
-
-
Tester for Touch Screen Digitizer without using microcontroller
234 2 2 -
Audio reactive glow LED wristband/bracelet with NFC / RFID-Tags
240 0 1 -
-
-
