AD9852 Evaluation Board
AD9852 Evaluation board which is now out of production. I did not make this design the gerber files are available on the Analog devices website:
ftp://ftp.analog.com/pub/www/techSupport/designTools/evaluationBoards/downloads/AD9854revE.zip
Note: some parts are no longer manufactured so your BOM will need to be updated depending on what is available, for instance you will have to find a suitable power connector as the one listed is not in stock. I would recommend not installing J11 as it is not useful with modern computers and the VI's for parallel communication are available, message me for more info about this. For Labview control a breakout box and FPGA will be required for ribbon cable connection.
AD9852 Evaluation Board
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by R K
-
Programmable Mist Maker - XIAO / QT PY Extension
1014 2 1 -
RadioHAT - Raspberry Pi radio development platform
816 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3276 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
3895 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4276 2 2
