|
|
PCB Way PCB |
x 1 | |
|
|
Any IC that is in 48 pin TQFP, or less pins(must have pins on all 4 sides) |
x 1 | |
|
|
Header Pins |
x 2 |
48 Pin SMD to DIP Adapter board
Technology is becoming more and more advanced.
Before, SMD packages were rare. Nearly all chips were in DIP, being breadboard friendly and easier to solder.
But now, most chips are in SMD, you won't find many parts in DIP anymore.
But for hobbyists, this is not good. A SMD chip cannot plug into a breadboard!
Thus, a SMD to DIP breakout board was created. This board is for TQFP48 and QFN 48 packages. Theoretically, it should work with 32 and 44 pin variants, as well.
You'll need a soldering iron that has a relatively pointy tip, or chisel, and you'll need to solder the chip onto the board.
Each connection on the chip is connected to a header pin location.
The board is double sided, so you can have both packages on it.
When you manage to do so, you'll have a DIP equivalent of your chip! Now, enjoy your new DIP chip and happy breadboarding!
48 Pin SMD to DIP Adapter board
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(6)
- 1 USER VOTES
- YOUR VOTE 0.00 0.00
-
10design
-
10usability
-
10creativity
-
10content
More by Hugo Hu
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
76 0 0 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
546 3 4 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
536 2 0 -
-
-
-
ESP32-C3 BLE Keyboard - Battery Powered with USB-C Charging
743 0 1 -
-
mammoth-3D SLM Voron Toolhead – Manual Drill & Tap Edition
709 0 1
