1Hz generator with versatile 555
With this circuit it is possible to obtain a clock of approximately 5V@1Hz for digital and analog projects. This circuit works with an AC input voltage of 100-240 VAC. You can use it for any application, both analog and digital. The circuit uses a transformerless (capacitive) source, full-wave rectification, zener regulator, a 555 mode oscillator, and a trimpot for fine tuning. A simple way to create a TTL clock generator with few parts, easily accessible, without needing to program anything, just with a soldering iron and just using good old analog electronics.
1Hz generator with versatile 555
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Engineer
-
Programmable Mist Maker - XIAO / QT PY Extension
1759 2 1 -
RadioHAT - Raspberry Pi radio development platform
1515 0 3 -
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3763 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4496 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
5296 2 2 -
