16 SOIC to DIP 16
Use SMD IC on DIP projects.
You need 2pcs of 8x1 pinheader.
2 first and 2 last pins of the header are trough hole. Middle ones soldered to other side where are larger pads.
Cut middle 4 pinheaders 2,5mm/0,1'' shorter
Insert to PCB. Solder 4 trough hole pins.
Press middle 4 pins against PCB and solder from other side like SMD part.
Press plastic towards PCB.
16 SOIC to DIP 16
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Adrian Hallik
-
Programmable Mist Maker - XIAO / QT PY Extension
1789 2 2 -
RadioHAT - Raspberry Pi radio development platform
1536 0 3 -
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3777 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4519 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
5319 2 2 -
