I have some actuators from 24 to 400 DCV 3 phase with in line resolver and angle resolverwhat is the best way to test them record teh resolver funtion Sin CoSine to calbrate the motor and angle r...
I would order all kinds of PCB's if I had an easy way to draw them. I tried programs like kicad and a bunch of others but they are just far to complicated. So I am still stuck with perf boards.It ...
I want to bury a reverse mount LED half way into the PCB and use the remainig PCB as a diffusor.Here is the footprint and 3d view of the reverse mount package with a line on the Edge.Cuts layer: since...
Hi, I am practicing soldering. I would like something like https://www.pcbway.com/project/gifts_detail/RP2040_plus_Raspberry_Pi_Development_Board__dual_core_processor_.html So I can as...
Hi all,For a project I created a custom PCB.It's a LiPo powered PCB with ESP32-WROOM-32E module, Lipo charging module, 3.3V Voltage regulator and MPU6050 Acc/Gyro unit. Charging via USB-C connecto...
I need to have a board with an esp-01 which will already be programmed, to send a signal to another device via espnow, in the box I need to use 3 buttons which will have different functions, the board...
I always use washing water for washing. I changed N types. Basically, all of them are whitish. Moreover, after washing the boards, they don’t look good before washing. How do you guys wash them? How a...
