Shiny Li
Jan 28,2016
1511
Straight-through Lead
A component lead that extends through a hole and is terminated without subsequent forming.
Shiny Li
Jan 28,2016
1709
Step-and-repeat
A method by which successive exposures of a single image are made to produce a multiple-image production master.
Shiny Li
Jan 28,2016
1491
Step Soldering
The making of solder connections by sequentially using solder alloys with successively lower melting temperatures.
Shiny Li
Jan 28,2016
1559
Statistical Process Control(SPC)
The use of statistical techniques to analyse the outputs of processes with the results guiding actions taken to adjust and/or maintain a state of quality control.
Shiny Li
Jan 28,2016
1577
Stamped Printed Wiring
Wiring which is produced by die stamping and which is bonded to an insulating base.
Shiny Li
Jan 28,2016
1412
Solidus
The highest temperature at which filler metal(Solder) is completely solid.
Shiny Li
Jan 28,2016
1385
Solderless Wrap
A method of connecting a solid wire to a square, rectangular, or V-shaped terminal by tightly wrapping the wire around the terminal with a special tool.
Shiny Li
Jan 28,2016
1537
Soldering
A process of joining metallic surfaces with solder, without the melting of the base metals.
Shiny Li
Jan 28,2016
1385
Soldering Iron Tip
The portion of a soldering iron that is used for the application of the heat that melts the solder.
Shiny Li
Jan 28,2016
1370
Solderability
The ability of a metal to be wetted by molten solder.
Shiny Li
Jan 28,2016
1588
Solderability Testing
The evaluation of a metal to determine its ability to be wetted by solder.
Shiny Li
Jan 28,2016
2184
Solder Side
The side of a printed board which is opposite to the component side.
Shiny Li
Jan 28,2016
1575
Solder Resist
An ink, lacquer, photo-resist or metal coating which is not wetted by molten solder. It is applied to specific areas of a PCB to stop them from being solder-coated, usually when mass soldering.
Shiny Li
Jan 28,2016
2330
Solder Projection
An undesirable protrusion of solder from a solidified solder joint or coating.
Shiny Li
Jan 28,2016
1484
Solder Paste
Finely divided particles of solder, with additives to promote wetting and to control viscosity, tackiness, drying rate, etc.
Shiny Li
Jan 28,2016
1275
Solder oil (Blanket)
Liquid formulations that are used in intermix wave soldering and as coverings on static and wave soldering pots in order to eliminate dross and to reduce surface tension during the soldering process.
Shiny Li
Jan 28,2016
2227
Solder Mask, Solder Resist
Coating with mask and insulate areas of a circuit pattern where solder is not desired.
| Ranking | Name | Answers |
|---|---|---|
| 1 | PCBWay Team | 11 |
| 2 | KhronoSound Audio | 2 |
| 3 | john James | 1 |
| 4 | Engineer | 1 |
| 5 | LouD _ | 1 |
