Tools, APP Software Used etc.
|
KiCADKicad
|
Description
Z80 Buffer Module prototype
Updated 26/05/26
A buffer module for the Z80Bus.
One way traffic. Connect the CPU/ Memory on the left.
May 15,2026
198 views
Z80 Buffer Module prototype
Z80 Buffer Module for the Z80Bus
198
0
0
Published: May 15,2026
Standard PCB
Download Gerber file 2
BOM(Bill of materials)
PCBWay Donate 10% cost To Author
File Last Updated: 2026/05/26 (GMT+8)
File update record
2026-05-2620:55:11
Parts List (BOM) is updated.
2026-05-2620:55:11
Gerber file is updated.
2026-05-1521:08:18
Other files for Assembly are updated.
2026-05-1521:05:53
Other files for Assembly are updated.
2026-05-1521:05:53
Parts List (BOM) is updated.
Only PCB
PCB+Assembly
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by M Voerman
-
Z80Bus super sound Prototype
Z80Bus Super Sound Module.Sound module with YM2203 (YM2149 compatible), YM3812 and SN76489Made a mon...
-
Z80Bus TMS9929 VDU Prototype v1
Z80Bus TMS9929 Video module - Prototype v1Version 1.0Corrected the TI LSB <> Z80 MSBAddied J2 ...
-
Z80Bus SG-1000
Z80Bus SG-1000 Module.Joystick and Sound.For joystick I use the double serial slot covers.For better...
-
Z80Bus TMS9929 Video module - Prototype 2
Z80Bus TMS9929 Module.Version 2.0 Changed the memory to 62256, with logic like all the others on the...
-
Z80Bus VDU EF9345 Prototype
Z80Bus VDU with EF9345.Select base IO with J2.This is without scandoubler so 15KHz VGA out.
-
Z80Bus VGA Module Prototype
Z80Bus VGA module.Use Rockwell R6545 or equal with transparante mode. With 25 MHz chip is a little o...
-
Z80Bus printer with fifo Prototype
Z80Bus module for centronics printer.Module uses Z80 FIFO, Z08060 to buffer printer data.J3 to selec...
-
Z80Bus Z180 CPU Module - Prototype
Z80Bus Z180 CPU module.Z180 CPU. 512Kb Ram and 128Kb ROM (I'm using a OneRom)Crystal @ 18,432 MHz, Z...
-
Z80Bus AT/PS2 keyboard - Prototype
Z80Bus keyboard interface.Build according to datasheet.Now with correct footprints.
-
Z80Bus OneRom module V2
Z80Bus OneRom Module.This is V2 with 512K Low Ram and 32k Hi Ram because V1 didn't go well with my o...
-
Z80Bus CF / CH376 / DS1302
Z80Bus module for CF-IDE/ CH376 / DS1302This storage module gives you 8-bit CF-Card access.J4 select...
-
Z80Bus Sound Module
Z80Bus Soundmodule with YM2149.SN76489 UpdateThis part is not working. TI idea about D0 is different...
-
Z80 CH376 Module
Z80Bus module with the CH376 breakout board.IO adress selectable. With my ch376 version I had to dis...
-
Z80 Serial
Z80Bus module with Z80 DART, Z80 CTC and own 1.8432 clock.
-
Z80 Clock modules
Z80Bus clock, reset and base module.The connector J2/J3 are for fitting a USB-C connector, I used a ...
-
Z80 32k rom and 32k Ram module
Z80Bus fixed rom/ram module. 32K eprom is mapped into $0000-$7FFF and 32k Ram is mapped into $8000-$...
-
Z80 Bank Switching Memory Module
Z80Bus Bankswitching module for 32K eprom or 32K ram modules. The modules are mapped into the low 32...
-
Z80 CF / Pio Module
Z80Bus module for CF and PIO.27/05/26 Updated the gerber and schematic. The 74ls08 is not needed for...
You may also like
-
Programmable Mist Maker - XIAO / QT PY Extension
506 1 0 -
RadioHAT - Raspberry Pi radio development platform
399 0 1 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
2927 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
3435 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
3775 2 2
