|
KiCADKicad
|
Wiimote IR Sensor adapter
Allows interfacing with a Wiimote camera over I2C for use with GUN4IR and OpenFIRE light guns.
Variants are present to allow use of the module either socketed as you'd find it on the Wiimote, or unsocketed for more compact installs.
This board should be ordered in 0.8mm thickness, otherwise you won't be able to solder to the pads on the camera.
OpenFIRE requires only R1, R2, R3 and the Wiimote camera itself - see GitHub for full, up-to-date instructions.
Wiimote IR Sensor adapter
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(4)
More by eat nooM
-
-
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
232 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1137 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
658 0 1 -
Programmable Mist Maker - XIAO / QT PY Extension
3126 2 3 -
RadioHAT - Raspberry Pi radio development platform
2674 0 4 -
-
