|
|
JST PH S3B-PH-SM4-TB_1x03-1MP P2.00mm (J1) |
x 1 | |
|
|
EE-SX1330 (U1) |
x 1 | |
|
|
0603 resistor 430 ohm (R1) |
x 1 | |
|
|
0603 resistor 10 kohm (R2) |
x 1 |
SE OptoEnd
A compact optical switch sensor using an high speed Omron(R) optical with a fall time less than 30us, used on a machine such as a 3D printer permits an high precision homing point without having to do a second "bump" at a slower speed.
I decided to design a simple optical end stop PCB with only SMD components all on the top layer for easier placement on machines that can be mounted with 2 M3 screws.
SE OptoEnd
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Francesco Salmaso
-
Programmable Mist Maker - XIAO / QT PY Extension
1177 2 1 -
RadioHAT - Raspberry Pi radio development platform
980 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3395 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4020 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4413 2 2
