|
|
KiCad 10 |
Ogre DMA output board
This is an expansion board for Ogre
Purpose is to provide streamed DMA output, either as parallel byte streams or serialised data
the serial stream is at the system clock rate
intent is either neopixel or video output
Ogre DMA output board
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(1)
- Likes(0)
More by Andrew McMeikan
-
Ogre DMA output board
This is an expansion board for OgrePurpose is to provide streamed DMA output, either as parallel byt...
-
COSMAC Ogre
This is a100x100mm 1802 board that has a USB loader as well as a header that could be connected to t...
-
Front Panel Binary Switch Entry and Display
transistors are 2n7002 configured as a set reset latch, adjust resistors to suit what voltage you wa...
-
QFN48/QFP48-0.5 to DIP
Could not find a QFP48 to DIP adapter so made this, can link any pins to ground or add pulldowns or ...
-
Mini_eurocard
This is a Euro card style protoboard but short, fits within 100mm x 100mmI 3d Printed a mini Euro ra...
-
logicBreakout
Designed so I can access logic analyzer pins as a single 10x1 rowcould make single sided but have a ...
-
SLG47004V-DIP
A simple adapter board for SLG47004V to DIP, note that both ground pins are connected togetherdecoup...
-
20 key keyboard Matrix
A basic 20 key matrix in a 100 x 100mm PCB, can chain boards together if you want a 40 key matrixdes...
-
Minimal Z180
The goal of this Z180 board is to keep it minimal.Fitting in a 70x100mm PCB it could be made single ...
-
W470812ASP4_ZUSBGerbers
This is still to be tested, wire wrap was good, but there are some differences I need to test. Only ...
-
W470812ASP1_GerbersCartSocket
Still in development , only build if you know whats up.
-
-
AudioLink – USB & Bluetooth LE Audio / Auracast Receiver with Balanced Line Outputs (nRF5340)
137 0 0 -
-
-
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
314 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1310 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
746 0 1 -
Programmable Mist Maker - XIAO / QT PY Extension
3276 2 4
