|
KiCADKicad
|
QFN48/QFP48-0.5 to DIP
Could not find a QFP48 to DIP adapter so made this, can link any pins to ground or add pulldowns or caps. Suits QFN, QFP, TQFP with 7mm body and 0.5mm pitch pins
QFN48/QFP48-0.5 to DIP
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(1)
More by Andrew McMeikan
-
COSMAC Ogre
This is a100x100mm 1802 board that has a USB loader as well as a header that could be connected to t...
-
Front Panel Binary Switch Entry and Display
transistors are 2n7002 configured as a set reset latch, adjust resistors to suit what voltage you wa...
-
QFN48/QFP48-0.5 to DIP
Could not find a QFP48 to DIP adapter so made this, can link any pins to ground or add pulldowns or ...
-
Mini_eurocard
This is a Euro card style protoboard but short, fits within 100mm x 100mmI 3d Printed a mini Euro ra...
-
logicBreakout
Designed so I can access logic analyzer pins as a single 10x1 rowcould make single sided but have a ...
-
SLG47004V-DIP
A simple adapter board for SLG47004V to DIP, note that both ground pins are connected togetherdecoup...
-
20 key keyboard Matrix
A basic 20 key matrix in a 100 x 100mm PCB, can chain boards together if you want a 40 key matrixdes...
-
Minimal Z180
The goal of this Z180 board is to keep it minimal.Fitting in a 70x100mm PCB it could be made single ...
-
W470812ASP4_ZUSBGerbers
This is still to be tested, wire wrap was good, but there are some differences I need to test. Only ...
-
W470812ASP1_GerbersCartSocket
Still in development , only build if you know whats up.
-
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
769 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
437 0 1 -
Programmable Mist Maker - XIAO / QT PY Extension
2888 2 3 -
RadioHAT - Raspberry Pi radio development platform
2467 0 4 -
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
4550 0 6
