Andrew McMeikan
AUSTRALIA • + Follow
Description
SLG47004V-DIP
A simple adapter board for SLG47004V to DIP, note that both ground pins are connected together
decoupling positions provided for recommended 4.7uF and 0.1uF as 0805 and 0603, populate as you see fit
Jan 21,2024
436 views
SLG47004V-DIP
2 Layers PCB 20 x 32 mm FR-4, 1.6 mm, 1, HASL with lead, Green Solder Mask, White silkscreen
A simple adapter board for SLG47004V to DIP, note that both ground pins are connected together
436
0
0
Published: Jan 21,2024
Standard PCB
Download Gerber file 2
PCBWay Donate 10% cost To Author
Only PCB
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-NonCommercial-NoDerivs (CC BY-NC-ND)
License.
Topic
- Comments(0)
- Likes(0)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Andrew McMeikan
-
Front Panel Binary Switch Entry and Display
transistors are 2n7002 configured as a set reset latch, adjust resistors to suit what voltage you wa...
-
QFN48/QFP48-0.5 to DIP
Could not find a QFP48 to DIP adapter so made this, can link any pins to ground or add pulldowns or ...
-
Mini_eurocard
This is a Euro card style protoboard but short, fits within 100mm x 100mmI 3d Printed a mini Euro ra...
-
logicBreakout
Designed so I can access logic analyzer pins as a single 10x1 rowcould make single sided but have a ...
-
SLG47004V-DIP
A simple adapter board for SLG47004V to DIP, note that both ground pins are connected togetherdecoup...
-
20 key keyboard Matrix
A basic 20 key matrix in a 100 x 100mm PCB, can chain boards together if you want a 40 key matrixdes...
-
Minimal Z180
The goal of this Z180 board is to keep it minimal.Fitting in a 70x100mm PCB it could be made single ...
-
W470812ASP4_ZUSBGerbers
This is still to be tested, wire wrap was good, but there are some differences I need to test. Only ...
-
W470812ASP1_GerbersCartSocket
Still in development , only build if you know whats up.
You may also like
-
-
-
-
Tester for Touch Screen Digitizer without using microcontroller
234 2 2 -
Audio reactive glow LED wristband/bracelet with NFC / RFID-Tags
240 0 1 -
-
-
