|
BlenderBlender Foundation
|
N64 Dust cover
This is a n64 controller port dust cover. I made it because someone made it, but it was not free. I recreated it myself and did not reuse the file because why pay when you can recreate it. It works by plugging the part in the Nintendo 64 controller port that is not being used/ will not be used. It took me a while to make it, since when I made it, it had some holes in it.
Let PCBWAY make it, I created it without any offset in place. Not guaranteed to work on commercial 3d printers.
N64 Dust cover
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(1)
- Likes(0)
More by Tre Seamans
-
-
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
224 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1123 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
643 0 1 -
Programmable Mist Maker - XIAO / QT PY Extension
3116 2 3 -
RadioHAT - Raspberry Pi radio development platform
2661 0 4 -
-
