MT3608 Boost Converter
Boost Converter with MT3608-IC. If you're planning a battery powered project and your project needs more power than the battery provides this Boost Converter is ideal for you! It's small but still can deliver 1 A. Resistor R2 is relevant for the Boost Voltage. If you want to boost your Lipo-battery to 5V Resistor R2 has to be 7,5K. SO: boosted voltage = 0,6*R2. If you have any questions feel free to ask me! I'd be pleased if you buy this PCB over my Link!
MT3608 Boost Converter
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(2)
More by Ardumani
-
Lipo/Li-Ion protection board
This protection board protects your Lipo or Li-Ion-cell. it is based on the DW01A battery protection...
-
DIY TP4056 charging/protection PCB
It is ideal for Li-Po or Li-Ion batteries. It can charge them up, show the charging state and protec...
-
MT3608 Boost Converter
Boost Converter with MT3608-IC. If you're planning a battery powered project and your project needs ...
-
Programmable Mist Maker - XIAO / QT PY Extension
1171 2 1 -
RadioHAT - Raspberry Pi radio development platform
976 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3395 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4019 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4411 2 2
