LED Flashlight Key chain:

It is a simple DIY (Do it yourself) kit to learn soldering and electronics. As this PCB comes in smaller size(50 x 35 mm) so it could be used as a key chain.

If you are looking for an easy way to learn soldering or just want to make a small portable gadget, This LED Flash light badge is a great choice. This LED Flash Light Badge PCB is designed to learn the soldering .

Features:

• Simple design and Low parts count
• Easy to change the CR2032 battery
• Quick to assembly
• A personal emergency flashlight
• Perfect to have for power outage

Parts required:

• 5 mm white LED
• Momentary Mini Push Button Switch - 6mm
• 10 ohm resistor
• CR2032 Battery Holder and CR2032 Battery

This kit requires you to only solder four unique parts onto a PCB and then insert a CR2032 battery.you can see markings and outlines for the four different components to make sure everything is assembled correctly.There is also silkscreen provided to write your name.

This project is open source  ?? . If you would like to build your own, all of the resources are available in my Github page

For Detailed Project Description Visit:https://tinkererway.com/2020/03/04/led-flash-light-badge/

Happy Making !