This PCB is an adapter that allows using HPE FlexibleLOM cards in normal PCIe x8 slots.

This adapter should be working with:

331FLR | Broadcom BCM5719 | Quad RJ45 GbE

366FLR | intel i350 | Quad RJ45 GbE

CX3 ALOM | Mellanox ConnectX-3 | Single SFP+ 10GbE

530FLR-SFP+ | Broadcom BCM57810S | Dual SFP+ 10GbE

544FLR-QSFP | Mellanox ConnectX-3 | Dual QSFP+ 40GbE/10GbE/QDR

544+FLR-QSFP | Mellanox ConnectX-3 Pro | Dual QSFP+ 40GbE

560FLR-SFP+ | intel 82599 | Dual SFP+ 10GbE

561FLR-T | intel X540 | Dual RJ45 10GbE

Ordering info:

Please make sure that you order the PCB with ENIG finish otherwise the contact would be poor.

Also make sure you bevel the edges of the PCIE edge connector to prevent damage to the PCIE slots on the host.

It is recommended to make a "Impedance" of the ordered PCBs check.

Attachment:

There is a PCIe bracket adapter