|
KiCad 8.0KiCad
|
GBA Cartridge (AGB-E05-01)
The most accurate reproduction of the AGB-E05-01 Game Boy Advance Cartridge PCB, without any restrictions.
Highly accurate traces, copper pours, masks and silkscreens/
Overlaying the original PCB you cannot tell a difference in any aspect, so a perfect replacement.
The PCB should be 0.8mm thick.
Finish can be 1oz ENIG, however it is better if you ask for Hard Gold (used when there are gold edge connectors to make them more durable).
The solder resist should be PANTONE 556 C if possible (that will give close to original green color). If not choose any color solder resist you want.
Silkscreen is white.
Source https://github.com/angelsix/retrosix-resources/tree/main/
GBA Cartridge (AGB-E05-01)
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(4)
- Likes(2)
More by Engineer
-
-
mammoth-3D SLM Voron Toolhead – Manual Drill & Tap Edition
298 0 0 -
-
-
-
Tester for Touch Screen Digitizer without using microcontroller
500 2 2 -
Audio reactive glow LED wristband/bracelet with NFC / RFID-Tags
458 0 1 -
-
