Eurorack Output Module (PCB panel)
An output module that converts the Eurorack levels into professional line levels with balanced 6.3mm TRS-jack outputs.
The module incorporates a VU meter, gain trimmer and a headphones amplifier with separate volume control, designed to drive 250 ohm studio headphones, with 3.5mm HP jack. Right input channel is normalled to the left input channel.
The design consists of 3 separate PCBs, this is the PCB panel
For more detailed information, please visit my GitHub:
https://github.com/tkilla64/eurorack/tree/main/output
Eurorack Output Module (PCB panel)
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(5)
More by TOMMY KILLANDER
-
Eurorack Output Module (Ctrl PCB)
An output module that converts the Eurorack levels into professional line levels with balanced 6.3mm...
-
Eurorack Output Module (Main PCB)
An output module that converts the Eurorack levels into professional line levels with balanced 6.3mm...
-
Eurorack Output Module (PCB panel)
An output module that converts the Eurorack levels into professional line levels with balanced 6.3mm...
-
A Compact Charging Breakout Board For Waveshare ESP32-C3
486 3 4 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
492 2 0 -
-
-
-
ESP32-C3 BLE Keyboard - Battery Powered with USB-C Charging
685 0 1 -
-
mammoth-3D SLM Voron Toolhead – Manual Drill & Tap Edition
674 0 1
