EasESC motor controller *6
This is the EasESC a 1.5A 9v capable dual brushless motor driver
I've designed it to be as easy to build as possible
Aside from the boards SMD'd by PCBWay you will need an RP2040 zero to solder to the bottom of the board
This version of the project has 6 boards to a panel so will make a minimum 30 EasESCs in one order.
This is the cheapest cost per unit
Connections:
RP2040 is soldered to the underside of the board
s2 goes to the data pin for channel 2 on an RC receiver
s1 goes to the data pin for channel 1 on an RC receiver
5v goes to the power pin on any channel on an RC receiver (providing the receiver with power)
GND goes to both the ground pin on any channel on an RC receiver and the battery ground
Vbat goes to the positive of the battery (or a switch that connects to the positive of the battery)
Firmware for this project is available on git hub here: https://github.com/Panic-Ben/EasESC
Build video coming soon
If you want a different number of boards
2 boards smd'd https://www.pcbway.com/project/shareproject/EasESC_motor_controller_2_e255e423.html
Single boards with no smd:
EasESC motor controller *6
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(1)
More by Ben Team Panic
-
EasESC motor controller just PCBs
This is the EasESC a 1.5A 9v capable dual brushless motor driverI've designed it to be as easy to bu...
-
EasESC motor controller *2
This is the EasESC a 1.5A 9v capable dual brushless motor driverI've designed it to be as easy to bu...
-
EasESC motor controller *6
This is the EasESC a 1.5A 9v capable dual brushless motor driverI've designed it to be as easy to bu...
-
Tangent drive motor mount
This pcb contains no usable copper traces, it instead uses the PCB's fiberglass as a mounting materi...
-
Brass screw PCB switch
The third uses brass leather rivet screws for lower resistance and therefore higher current carrying...
-
Dual PCB Screw Switch
A dual PCB screw switch that is lightweight and robust, it uses tpu to ensure the connection doesn't...
-
single PCB Robot Screw Switch
A single PCB screw switch that is lightweight and robust, it uses tpu to ensure the connection doesn...
-
Programmable Mist Maker - XIAO / QT PY Extension
1393 2 1 -
RadioHAT - Raspberry Pi radio development platform
1168 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3540 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4213 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4591 2 2
