This is the ESP32 Miner Board for the Duco-Miners Projects.

The complete project information can be found here: https://www.pcbway.com/project/shareproject/DUCO_Miners_a67cdb4b.html

Assembling the ESP32 Miner Board:

You can get this board fabricated & assembled directly from PCBWay at an attractive cost.

If you want to assemble the boards on your own, you can download the BOM & the KiCad PCB design files.

Code the ESP32 Miner Board:

Uploading the code to the ESP32-Miner Board:

Don't forget to change the WiFi Network Details & your Duino Coin wallet username in the ESP32 Miner code or else you won't earn anything!

Once done, upload the code to the ESP32. You will need to connect the ESP32-Miner Board using a CP2102 USB to the Serial Converter (I used this converter) for uploading the code. The converter can be directly inserted in the programming header connector holes. You might need to hold it under light force, to maintain the contacts between the ESP32-Miner & the CP2102 USB to Serial Converter while uploading is in progress Also, make sure you put the ESP32-Miner in Boot Mode before you start uploading, by pressing the BOOT Button & RESET Button simultaneously on the ESP32-Miner & then releasing the RESET Button first & then the BOOT Button.

Hit the Upload Button on Arduino IDE & you are done !!!

Next Steps:

Refer to the main project page to view the complete project here: https://www.pcbway.com/project/shareproject/DUCO_Miners_a67cdb4b.html