|
FreeCad |
CM3588NAS case
Simple case for the FriendlyElec CM3588 NAS board
The case is designed for 24/7 operation and fits in one height unit in a rack. I left out openings for the power and reset buttons intentionally as they wouldn't be easily accessible in a rack situation anyways. Fans should be installed so that they are blowing the air out of the case, so the airflow goes from the left, first over the CM3588, then over the SSDs and then out.
CM3588NAS case
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Stefan Gofferje
-
Programmable Mist Maker - XIAO / QT PY Extension
1172 2 1 -
RadioHAT - Raspberry Pi radio development platform
977 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3395 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4020 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4412 2 2
