A Project of mine requires a small number of ICs with supporting <3mil traces and spacing, about which ive asked previously and gotten a good answer.I have gotten quite a lot further through the pr...
Hello, I have built the adapter and programmed it with the settings provided successfully. Everything looks fine, the PCB is clean, all contacts are fine and the joystick port works, but a PS/2 mouse ...
Hi Paul, By luck, I came across your curve tracer project. This looks like a great tool to build. I've been looking for one. Is your curve tracer project listed here using the most recent PCB and BOM ...
I am designing something that requires information on PIN number layout that I cannot access because I am not a corporation, can you get access to the information that I cannot?
IS there Any ANYWAY to make a PS2 SLIM into a handheld, if so anyone know how or how to rebuild an old one, my sis sent to me for my son he has autism and asked her, but when it got to us it doesn't ...
Electrolytic capacitor manufacturers say that if you energize them before 2 years of storage (5-35C minus 75% RH) there is no need to refurbish the capacitor.Is this only valid for new aluminum electr...
We have four ICS-43434 microphones connected to an ESP32 on a custom PCB. The distance between each mic is 75 mm. During manufacturing, we've noticed a high failure rate: on many boards, one of the mi...
Can I get this manufactured but slimmer, around 5mm thickness and I want to have 2.8mm Display instead, of ESP32-S3 2inch Capacitive Touch Display Development Board, 240×320 Pixels, IPS Panel, 32-bit ...
