AZ-ONEBoard-Modular development board
With the help of this development board, hobbyists like you no longer have to waste time prototyping due to bad solder connections, lack of compatibility or other sources of error. Simply connect the appropriate expansion board, program it and that's it! Here is an overview of all features:
An extension board can be found HERE.
Overview:
- individually configurable board by plug-in expansion boards (via I2C)
- Supply voltage from 2.4 V to 5.5 V at the battery header or via Micro-USB
- Network integration by WLAN chipset (ESP12F)
- Programming without FTDI adapter (CH340G)
- at the Micro-USB port
- TX/RX LED on the board (visualization during upload)
- Free usable digital ports with labeling on the board
Product summary:
With the help of this new ESP12F-based board, IoT projects can now be implemented in a modular and simple way. A plug-in system with female and male connectors allows a wide range of sensors to be connected to the motherboard via I2C.
This allows the board to be expanded according to project needs without much wiring effort and with little time and cost. In the future, many expansion boards in the same form factor as the SHT30-DIS-B based humidity and temperature module shown here will follow.
The product offers especially beginners or for projects with low budget and tight schedule an easy way to realize what is planned.
Possible extensions:
- SHT30 Temperature-humidity sensor
- BME280 Pressure, temperature, humidity sensor
- OLED Display 0.96"
- MPU6050 Accelerometer, Gyroscope
- BH1750 Digital light sensor
- CCS811 Air quality sensor
- DS3231 Time chip
- ...
- 3D printing
- Comments(0)
You might like
-
-
-
-14%
PCBWay RP2040 ESP12F IoT Module-Support Arduino,MicroPython and CircuitPython$19.99 or 2400 BeansBUY NOW -
-
-
-
-
-
-
-
-
-
-
-
-
-
-
