Product Description

USB-Type-C to DIP 12 Pin Adapter Breakout-Board

Description:

The USB Type-C connector is intended to supersede a wide range of existing USB connectors. 

It is reversible and can serve in both USB host and USB device roles, allowing either end of a cable to be plugged into a receptacle with either side up, and it can support negotiation of increased power and alternate uses of the USB interface wires.

The USB-C connectors 24 tightly-spaced pins make it difficult to use in a hobby project or prototype design. 

This breakout board helps by providing access to the connectors pins for power (VBUS and GND), USB 2.0 differential data (D+ and D-), Configuration Channel and Sideband Use.

  • VCC Positive pole of power supply
  • SBU1 Sideband usage
  • SBU2 Sideband usage
  • DP1 USB 2.0 differential signal, position 1, positive
  • DP2 USB 2.0 differential signal, position 2, positive
  • CC1 Configure channels for identification and control
  • CC2 Configure channels for identification and control
  • DN1 USB 2.0 differential signal, position 1, negative
  • DN2 USB 2.0 differential signal, position 2, negative
  • GND Negative pole of power supply

Specifications:

Current:max. 3A

Base Material: FR4

Board Thickness: 1.6mm

Size: 17.6 * 21.5*5mm

  • Comments(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000

    You might like

    Product Name
    Link for reference
    Quantity