Shiny Li
Jan 20,2016
648
Conformal Coating
A thin dielectric cover brushed, dipped or sprayed over parts and circuits of PCBs for environmental and mechanical protection.
Shiny Li
Jan 20,2016
743
Conductor
A single conductive path in conductive pattern. A PCB has at least one layer of conductors. Synonyms: path, trace.
Shiny Li
Jan 20,2016
606
Conductor Width
The observable width of the pertinent conductor at any point chosen at random on the printed board, normally viewed from vertically above unless otherwise specified.
Shiny Li
Jan 20,2016
705
Conductor-to-hole Spacing
The distance between the edge of a conductor and the edge of a supported or unsupported hole.
Shiny Li
Jan 20,2016
641
Conductor Thickness
The thickness of the conductor at any point chosen at random on the printed board, normally viewed from vertically above unless otherwise specified.
Shiny Li
Jan 20,2016
647
Conductor Spacing
The average or minimum (as specified) distance between the adjacent edges of conductors on the same layer of a printed board.
Shiny Li
Jan 20,2016
773
Conductor Side
The side of a single-sided printed board containing the conductive pattern.
Shiny Li
Jan 20,2016
581
Conductor Layer
The total conductive pattern formed upon one side of a single layer of base material.
Shiny Li
Jan 20,2016
622
Conductor Base width
The conductor width at the plane of the surface of the base material. See also: Conductor width.
Shiny Li
Jan 20,2016
639
Conductive Pattern
The configuration or design of the conductive material on the base laminate. Includes conductors, lands, and through connections.
Shiny Li
Jan 20,2016
742
Conductive Foil
A thin sheet of metal that may cover one or both sides of the base material and is intended to form the conductive pattern.
Shiny Li
Jan 20,2016
615
Conductive Adhesive
A material to which metal particles (usually silver ) are added to increase electrical conductivity.
Shiny Li
Jan 20,2016
570
Component
Any of the basic parts used in building electronic equipment, such as a resistor, capacitor, DIP or connector, etc.
Shiny Li
Jan 20,2016
549
Component side
(Primary side) The surface layer of a board on which most of the components are placed. Component side is also referred to as the top side (layer one-counting downwards) of the board.
Shiny Li
Jan 20,2016
596
Component Hole
A hole in a PCB through-which a component lead passes in order to be soldered or connected mechanically to the printed circuit and electrically to the conductive pattern. Synonym: mounting hole....
Shiny Li
Jan 20,2016
579
Component Density
The quantity of components on a unit area of printed board.
Shiny Li
Jan 20,2016
616
Compiler
A software module that analyses and converts programs from a high-level language to binary machine codes.
Shiny Li
Jan 20,2016
770
Compatibility
In which materials can be mixed or brought into contact with no reaction or separation.
Shiny Li
Jan 20,2016
719
Cold Solder Connection
A solder connection that exhibits poor wetting and that is characterized by a greyish porous appearance.
| Ranking | Name | Answers |
|---|---|---|
| 1 | PCBWay Team | 4 |
| 2 | KhronoSound Audio | 1 |
