Mini Line Following Robot Card

### DESCRIPTION ( Introduce yourserlf and your project)

Hello, I'm Poyraz and 12. It's my project: Mini Line Following Robot Card. You mount in front of the robot. You must only connect the motors and battery. This ard is only 40mmx50mm

When you use this card your robot is like this

https://www.youtube.com/watch?v=CFW4T4iZ8g0 

### TECHNICAL DETAILS (With project photos)

I design this card with DipTrace. The CNY70 sense the line and trigger the transistor. The transistor run  the motors. (Right sensor to right motor, left sensor to left motor) I have got prototypes


COMPONENTS

2x 1n4001

2x 100ohm resistors

2x 220ohm resistors

2x10Kohm resistors

3x Terminal blocks

2x CNY70

2x P2N2222

1x 7805

### Words to PCBWay

When you help to me, I say Thanks for you. I have another project. It's smart school. You helped to me for the smart school. And I use a stencil. Thanks

Bye bye

Apply for sponsorship >>
1600+ Projects Sponsored
Jul 26,2018
2,023 viewsReport item
  • Comments(0)
  • Likes(1)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000