ZX Spectrum keyboard edge connector 8 way
When ordering PCB make sure they are 0.6mm thick that is the only special part.
this is the 8 way, don't forget to download the 5 way.
The flexi cables I used are
TE Connectivity FLEX CABLE
5 way A9AAT-0504F
8 way A9AAT-0804F
from Digikey
ZX Spectrum keyboard edge connector 8 way
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(7)
More by Lee Smith
-
ZX Spectrum 48k Mechtrum Keyboard with space bar
A new mechanical keyboard for the ZX Mechtrum DLX case3d files can be found on my printables pagehtt...
-
Neo Geo reproduction MV-1C save game and headphone PCB
This is my Neo Geo MV-1C PCB, it was copied from an original and I included an option to add the NVR...
-
ZX Spectrum keyboard edge connector 8 way
When ordering PCB make sure they are 0.6mm thick that is the only special part.this is the 8 way, do...
-
ZX Spectrum keyboard edge connector 5 way
When ordering PCB make sure they are 0.6mm thick that is the only special part.this is the 5 way, do...
-
Atari 2800 Joystick
I made a modern version of this Atari 2800 Joystick with some small changes to the self center mecha...
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
153 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1006 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
575 0 1 -
Programmable Mist Maker - XIAO / QT PY Extension
3045 2 3 -
RadioHAT - Raspberry Pi radio development platform
2592 0 4 -
-
-
