Atari 2800 Joystick
I made a modern version of this Atari 2800 Joystick with some small changes to the self center mechanism.
More details can be found on the video I am currently making.
Atari 2800 Joystick
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(1)
- Likes(4)
More by Lee Smith
-
ZX Spectrum 48k Mechtrum Keyboard with space bar
A new mechanical keyboard for the ZX Mechtrum DLX case3d files can be found on my printables pagehtt...
-
Neo Geo reproduction MV-1C save game and headphone PCB
This is my Neo Geo MV-1C PCB, it was copied from an original and I included an option to add the NVR...
-
ZX Spectrum keyboard edge connector 8 way
When ordering PCB make sure they are 0.6mm thick that is the only special part.this is the 8 way, do...
-
ZX Spectrum keyboard edge connector 5 way
When ordering PCB make sure they are 0.6mm thick that is the only special part.this is the 5 way, do...
-
Atari 2800 Joystick
I made a modern version of this Atari 2800 Joystick with some small changes to the self center mecha...
-
Programmable Mist Maker - XIAO / QT PY Extension
1074 2 1 -
RadioHAT - Raspberry Pi radio development platform
890 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3334 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
3942 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4329 2 2
