ZX81 Tactile Keyboard Rev.2
This is a PCB for a cheap and easy to build keyboard, designed to go with revision 1.6 of the ZX81+38 replica board.
Note: There is a newer revision of this board which was updated to accommodate the changed layout of the keyboard connector on revision 1.9 of the ZX81+38 motherboard.
Please see my blog post for more details.
@PCBWAY: Do not copy the contents of my blog here without my permission! If this happens again I will stop sharing my projects on your site. Thank you.
ZX81 Tactile Keyboard Rev.2
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(6)
More by hackup.net
-
ZX81 Tactile Keyboard Rev.3
This is a PCB for a cheap and easy to build keyboard, designed to go with revision 1.9 of the ZX81+3...
-
ZX81 Tactile Keyboard Rev.2
This is a PCB for a cheap and easy to build keyboard, designed to go with revision 1.6 of the ZX81+3...
-
NeoRAM Remix
The NeoRAM is a RAM extension for the Commodore 64/128 computers that is compatible with the GeoRAM ...
-
Pi1541 IO Adapter, Rev.4
This is the 4th revision of the IO adapter board for the Pi1541 project. This revision is mostly ide...
-
Pi1541 IO Adapter, Rev.2
This is an IO adapter board for the Raspberry Pi 3 based on the awesome Pi1541project by Steve White...
-
Pi1541 IO Adapter, Rev.1
This is an IO adapter board for the Raspberry Pi 3 based on the awesome Pi1541project. It is current...
-
ROM Cartridge Replica for the Commodore 16, 116, and Plus/4
This is a 1:1 replica of the original ROM cartridge PCBs (artwork no. 310198 rev.1) for the 264 line...
-
C264Cart for the Commodore C16, C116, and Plus/4
The C264Cart can be configured to support either 16k ROM images or 32k ROM images by setting JP6 and...
-
C128 Diagnostic Cartridge 325093-01 Replica
This is a 1:1 replica of the PCB for the Commodore C128 Diagnostic Test cartridge assy no. 325093-01...
-
PLA264 for the Commodore C16, C116, and Plus/4
The PLA264 is a replacement for the MOS 251641-02 PLA chip used in Commodore's TED-based 8-bit compu...
-
KERNALquattro Adapter
This is the programming adapter board for the KERNALquattro 2364 ROM replacement. It maps the pins o...
-
KERNALquattro
The KERNALquattro is a compact, versatile, and still relatively cheap replacement for 2364 ROMs as f...
-
ATF1504-FT232HQ Shield
This is a "hat" PCB that plugs onto an easily available FT232H board and provides a JTAG interface t...
-
"64kCart" Bank Switching Cartridge
The 64kCart is a simple bank switching cartridge for the C64/C128. It is a remake of the "64k-Karte"...
-
MagicDeskCart
The MagicDeskCart is a simple bank switching cartridge for the C64/C128. It is my rendition of a "Ma...
-
Pi1541 IO Adapter, Rev.5
This is the 5th revision of the IO adapter board for the Pi1541 project. A minor revision with mostl...
-
Pi1541 IO Adapter, Rev.3
This is the third revision of the IO adapter board for the Pi1541 project. This revision is mostly i...
-
Programmable Mist Maker - XIAO / QT PY Extension
1394 2 1 -
RadioHAT - Raspberry Pi radio development platform
1172 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3541 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4216 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4596 2 2
