vl53l8ch_spi_Fabrication_Gerber
This project is a small form factor (2cmx3cm) pcb containing the VL53L8CH, a time-of-flight (ToF) sensor by STMicroelectronics. Off the shelf evaluation kit SATEL-VL53L8 by STMicroelectronics is a good start for people who want to test the capability of the sensor. Due to its large form factor, lack of mounting hole, and dependent on breadboard for connection, SATEL-VL53L8 is not suitable for mounting on objects, such as robot arms. For that reason, we have created this pcb with a logic level shifter (3.3V -> 1.8V), one LDO (3.3 -> 1.8), and a JST SH-type 2.54mm pitch connector.
vl53l8ch_spi_Fabrication_Gerber
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Engineer
-
Programmable Mist Maker - XIAO / QT PY Extension
1483 2 1 -
RadioHAT - Raspberry Pi radio development platform
1252 0 3 -
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3603 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4294 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4673 2 2 -
