gerber-share
The core of the system is built around the CD4013 dual D-type flip-flop IC, which acts as a bistable element for storing and toggling system states.
User input signals (such as push buttons) are fed into the flip-flop circuit
The flip-flop toggles its output state based on input transitions
Logic gates ensure proper sequencing and prevent invalid switching conditions
Output signals are routed through transistor-based driver stages to control external loads such as motors
gerber-share
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Engineer
-
-
AudioLink – USB & Bluetooth LE Audio / Auracast Receiver with Balanced Line Outputs (nRF5340)
149 0 0 -
-
-
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
319 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1317 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
750 0 1 -
Programmable Mist Maker - XIAO / QT PY Extension
3285 2 4
