Universal E-Paper adapter PCB
This is a small 24x22mm universal E-Paper Display adapter PCB
Its simpler to use a stencil with the PCB as the hardest to solder is really the 24 pin FPC Connector. Otherwise you could solder it with a small soldering iron.
The BOM can be found in the images.
You can find a my video about this adapter here on YouTube:
Universal E-Paper adapter PCB
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(5)
- Likes(7)
- 1 USER VOTES
- YOUR VOTE 0.00 0.00
-
10design
-
10usability
-
10creativity
-
10content
More by Aaron Christophel
-
esp32 Pricetag Access Point PCB
This project is a simple PCB for the E-Paper pricetag AP firmware if wrote, this enables the control...
-
Universal SPI Flash Adapter WSON SOP WSON USON
A simple PCB to read and write multible different 8 Pin SPI FlashWSON-8 8x6mmSOP-8WSON-8 6x6mmUSON-8...
-
Universal E-Paper Sniffer
Universal E-Paper SPI Communication sniffer PCBThis PCB will help you to very simple analyze the SPI...
-
Universal E-Paper adapter PCB
This is a small 24x22mm universal E-Paper Display adapter PCBIts simpler to use a stencil with the P...
-
CAN Bus Radio Adapter Board
This is the PCB for my CAN Bus videosIt is used to make the CAN Radio plug in that is now standard i...
-
3D blink_ Bauble for your Christmas Tree Christmas2019 Part 2/2
With this project i am contributing to the Christmas2019 contest.This is part two here you can get p...
-
3D blink_ Bauble for your Christmas Tree Christmas2019 Part 1/2
With this project i am contributing to the Christmas2019 contest.This is part one here you can get p...
-
Programmable Mist Maker - XIAO / QT PY Extension
1262 2 1 -
RadioHAT - Raspberry Pi radio development platform
1079 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3476 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4125 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4504 2 2
