Atta Rehman
PAKISTAN • + Follow
Description
Speeduino NO2C v0.2.2
This is the orignal design for speeduino NO2C, now on PCBWay to order from anywhere with or without assembly.
Mar 12,2025
2,157 views
Speeduino NO2C v0.2.2
2 Layers PCB 54 x 102 mm FR-4, 1 mm, 1, HASL with lead, Black Solder Mask, White silkscreen
The orignal Speeduino NO2C 2.2 design
2157
6
2
Published: Mar 12,2025
Standard PCB
Download Gerber file 100
BOM(Bill of materials)
PCBWay Donate 10% cost To Author
Only PCB
PCB+Assembly
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(2)
- Likes(6)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Atta Rehman
-
4 Ohm Woofer 2nd Order low pass Crossover@500Hz
A low pass@500Hz 2nd order Crossover for a 4 ohm woofer:Series inductor: L=0.25 mHShunt capacitor: C...
-
8 Ohm Mid Range 2nd order Crossover @500Hz
Crossover for 8 Ohm midrange2nd Order@500hz-3.5kHz:Series capacitor: C=28 μFShunt inductor: L=1.8 mH
-
8 Ohm twitter 2nd order High Pass Crossover @3.5kHz
For an 8 Ohm twitterSeries capacitor:C=4.0 μFShunt inductor:L=0.25 mH@3.5kHz
-
ATX PC Power Suplly to 12v out for Automotive Amp
Automotive car amplifiers are a great way to get high power for a audio set up, especially for car s...
-
E120 Corolla Interior Light Front
The Orignal Bulbs for this car are not that good and I failed to find some LED ones that fit into th...
-
Logic probe
A cricuit board to check weather a signal is HIGH or LOW
-
PC volume knob
A physical knob to take control of volume on a PC.
-
E120 Corolla Interior Light Center
The Stock Center roof light is not that strong, nor are the after market LED ones so this board fits...
-
Arduino UNO MOSFET Shield
A sheild for Arduino UNO that houses 6 to-220 transistorsFirst three are low Last three are HighUsin...
-
Mitsubishi Lancer EVO 8 LED wall panel
Led wall panel with evo 8 graphics and functional taillights that sit flush inside board
-
Buggati Chiron LED wall panel V2
The Buggati Chiron LED wall panel updated with flush mount leds.
-
R35 GTR led wall panel V2
The R35 GTR wall panel updated with flush mount leds.
-
Porsche 992 LED wall panel V2
The Porsche 992 wall panel updated with flush mount leds.
-
BMW F82 LED wall panel V2
The previous panel updated with flush mount leds,
-
CLS 63 LED wall panel V2
The CLS 63 wall panel now with type C power and flush Leds.
-
Ferrari 458 LED wall panel
Ferrari 458 italia liberty walk kit wall art with leds power through type C, leds sit flush inside b...
-
Buggati Chiron LED wall panel
1x Type C 12pin3x 0805 white led 5v2x 0805 600 ohm resistor
-
BMW F82 LED wall panel
12 pin type C4x 0805 leds, 5v white/yellow2x 0805 resistors 620ohm
You may also like
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
2118 0 5 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
2620 3 7 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
2758 2 0 -
-
-
-
ESP32-C3 BLE Keyboard - Battery Powered with USB-C Charging
2815 0 2 -
