Raylax Smartphone Radiation Detector
This PCB is a usefull tool to make the Smartphone-Radiation visible. the LED lights up, if something is sent on a 2GHz frequency. If it lights very bright, there is a strong Radiation. if it only lights a litlebit or blinks, there is not so much of Radiation.
U1 = LM258D
Q1 = BC848
D1 = LED Red 1206
C1 = 1uF 1206
C2 = 1uF 1206
C3 = 100uf 1206
R1 = 100k 1206
R2 = 220k 1206
R3 = 1.6M - 2.5M 1206 (Sensitivity of your Detector)
R4 = 1k 1206
Raylax Smartphone Radiation Detector
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(3)
More by Christian Gaehwiler
-
Programmable Mist Maker - XIAO / QT PY Extension
1185 2 1 -
RadioHAT - Raspberry Pi radio development platform
991 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3405 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4030 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4424 2 2
