Playstation PS-IO Switchboard
With every PSIO Flashcart you have one Switchboard included. But what if you have more than one PS1-Console and you want to use the PSIO Flashcart with all of them. => You will need more Switchboards. One for each Console.
That's at least what my problem was and that way i designed this little replica. It's exactly useable like the original switchboard and can get installed with the original installation-instruction from the PSIO website.
Parts you will need:
1x HC4066 - [SOP14]
R1-R3 = 10K SMD [1206]
R4 = 47K SMD [1206]
C1 = 100nf SMD [1206]
The parts-costs are below 1 USD for all together!
Playstation PS-IO Switchboard
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(1)
- Likes(1)
- 2 USER VOTES
- YOUR VOTE 0.00 0.00
-
10design
-
10usability
-
10creativity
-
10content
-
1design
-
1usability
-
2creativity
-
3content
More by Klaus Sommer
-
Arduino Mega Shield for LEAPFROG and VTECH v0.5
An Arduino Mega Shield, for dumping the game-cartridges of 10 Vtech & Leapfrog - Systems.More in...
-
Arduino MEGA Shield V0.6A
V0.6 supports the cartridges for these systems!Vtech V.SmileVtech V.Smile MotionVtech V.Smile Smartb...
-
BPROM Read-Adapter v0.2 (21in1)
So the new adapter support's READING the following 21 devices (Of course it also supports the equiva...
-
BPROM 14in1 Adapter-Package
The adapter support's READING the following BPROM's and even the 2708 EPROM:82S123 (256 byte)82S129 ...
-
Vtech MobiGo - Adapter for TL866II Plus
An Adapter-Board for the TL866IIPlus, which will help you to get your Vtech MobiGo Savecards and Car...
-
MSP55LV100S Adapter for TL866IIPlus!
With this adapter, you can dump MSP55LV100S flashroms, as S29GL064A10TFIR3.?
-
TL866IIPlus Adapter for MSP55LV128 & MSP55LV650
So far there is not easy way to read the MSP55LV650 and MSP55LV128 flashroms with any available prog...
-
Playstation PS-IO Switchboard (with MM3 Modchip)
With every PSIO Flashcart you have one Switchboard included. But what if you have more than one PS1-...
-
Playstation PS-IO Switchboard
With every PSIO Flashcart you have one Switchboard included. But what if you have more than one PS1-...
-
TL866II - NAND08 Adapter
### DESCRIPTIONThis is the needed base board for the TL866II Plus, to read NAND08 Tsop48 chips. For ...
-
-
-
-
Tester for Touch Screen Digitizer without using microcontroller
229 2 2 -
Audio reactive glow LED wristband/bracelet with NFC / RFID-Tags
235 0 1 -
-
-
