This board is specifically designed for the TED series of Commodore computers (c16, c116 and Plus/4) and it is based on the work of Levente Hársfalvi (https://www.commodore.ca/manuals/funet/cbm/documents/projects/interfaces/plus4joy/plus4joy.html) and, of course, on the original Unijoysticle 2 by Retro.Moe (https://gitlab.com/ricardoquesada/unijoysticle2) It uses the same firmware as the C64 version and works exactly the same, except for two particularities:Joystick #1 and #2 are swapped (AFAIK, default joystick in c16 games is usually #1)The board can be self-powered or USB-powered, there is no barrel jackImportantBoard **must** be 1mm thick or the mini DIN connectors won't fit!BOM- 10 x 110ohm, 1/4W resistors (100ohm is also OK)- 2 x 150ohm, 1/4W resistors- 3 x 100nF ceramic capacitors- 1 x 220uF 16V, low ESR, electrolytic capacitor- 1 x 3mm red LED- 1 x 3mm green LED- 1 x 1n5819 Schottky diode- 1 x SPST right angle, 6x6x5mm push button- 2 x 20pin DIP sockets- 2 x 74HCT240 buffers with inverted outputs- 2 x Mini DIN male, PCB mount connectors (see project page for possible sourcing)- 2 x 2x10 PIN double row, straight, female header- 1 x ESP32 Mini Kithttps://gitlab.com/ricardoquesada/unijoysticle2
