Measuring wheel PCB
This DIY measuring wheel measures distance as you roll it along the ground (the wheel will have a circumference of 1m). The picture included illustrates the wiring of the electronic display. When a button is pressed, the display counts up. A PCB is needed to clean up the wiring and make it more compact. I decided to make this project to solve the problem of accurately measuring distance when doing some sprinting workouts. Instead of measuring the 30 or 40m required with a measuring tape, I decided to make this project to make my life easier.
Measuring wheel PCB
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Engineer
-
Programmable Mist Maker - XIAO / QT PY Extension
1290 2 1 -
RadioHAT - Raspberry Pi radio development platform
1098 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3488 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4149 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4515 2 2
