|
KiCADKicad
|
MULTI USE BOARD UNO Headers Minimalistic Speed Compatible
This is the minimalist Multiple Use Board.
It is Arduino UNO R3 compatible (except for voltages).
To make is compatible you have to use the 16MHz crystal, the ATMEGA328P-PU, make the fuses match Arduino, load a boot loader for the UNO R3. Then connect an FTDI cable or breakout board that has DTR support. Alternatively, if your serial cable does not have a DTR signal you can press the reset button and let it go at the beginning of programming.
MULTI USE BOARD UNO Headers Minimalistic Speed Compatible
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(1)
More by Robert Kolski
-
MULTI USE BOARD UNO Headers Minimalistic Speed Compatible
This is the minimalist Multiple Use Board.It is Arduino UNO R3 compatible (except for voltages).To m...
-
MULTI USE BOARD UNO Headers Minimalistic
This is a minimalistic design to make a board that is partially Arduino compatible. The incompatibil...
-
W400230ASJ100_AS-OPEN9BTN-UNOSHLD-01-V1.0-gerber files
Upload one of 2 programs.1 - An NES Classic / Wii Classic Controller program on an Arduino UNO.2 - A...
-
-
-
AudioLink – USB & Bluetooth LE Audio / Auracast Receiver with Balanced Line Outputs (nRF5340)
278 0 1 -
-
-
-
Émetteur Récepteur Optique Expérimental (communication UART ATtiny + fibre optique)
358 0 1 -
SmallOLED - Live PC Stats, Animated Clocks & Audio Visualizer
1428 0 3 -
"Talking Multimeter": Arduino-Based Speech Add-on for Multimeters with SCPI Protocol
797 0 1
