Kung Fu Flash 2 USB-C (Rev. 2)
Kung Fu Flash 2 Module with USB-C connector
See https://github.com/JuergenLeber/KungFuFlash2-USBC
Thanks go out to Kim Jorgensen for the original design https://codeberg.org/KimJorgensen/KungFuFlash2 and to Fedor Zagumennov for the USB-C version https://github.com/Sgw32/KungFuFlash2-USBC
A nice case can be found here: https://www.printables.com/model/119330-kung-fu-flash-cartridge-case
Kung Fu Flash 2 USB-C (Rev. 2)
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Juergen Leber
-
Kung Fu Flash 2 USB-C (Rev. 2)
Kung Fu Flash 2 Module with USB-C connectorSee https://github.com/JuergenLeber/KungFuFlash2-USBCThan...
-
ATARI FujiNet FN32ROV-1.7.1
See https://github.com/FujiNetWIFI/fujinet-hardware/tree/master/ATARI/FN32ROV-1.7.1This version is c...
-
Atari ST VGA adapter
See https://github.com/etomuc/ST-to-VGA
-
Gigatron TTL PCB
This is the PCB to build a Gigatron TTL computer.See https://gigatron.io/
-
Amstrad CPC M4 Board v2.5C
See https://github.com/M4Duke/m4hardware
-
Programmable Mist Maker - XIAO / QT PY Extension
1585 2 1 -
RadioHAT - Raspberry Pi radio development platform
1323 0 3 -
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3662 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4360 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
5155 2 2 -
