Header extension for 500W Spindle
This design provides a header extension to a generic 500W spindle for desktop CNCs. The header contains some LED lighting and an optical tachometer. The enclosure for this project consists of three different parts: a wood body, an acrylic cover and an aluminum ring to hold the whole assembly.
This project is part of the following video, where I test two desktop CNCs:
https://www.youtube.com/watch?v=nJvm3iWlR0M
Header extension for 500W Spindle
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Alvaro Gomez
-
Digital Sand Clock Controller
This is a controller for a Digital Sand Clock, using persistence of vision in combination with strob...
-
Header extension for 500W Spindle
This design provides a header extension to a generic 500W spindle for desktop CNCs. The header conta...
-
Training Board for PIC18F2550
This project implements a minimal training board for a PIC18F2550 microcontroller including switch i...
-
Programmable Mist Maker - XIAO / QT PY Extension
1384 2 1 -
RadioHAT - Raspberry Pi radio development platform
1163 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3538 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4207 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4584 2 2
