Digital Sand Clock Controller
This is a controller for a Digital Sand Clock, using persistence of vision in combination with stroboscopic light. The controller uses a PIC18F4550 to coordinate the movements of 16 small mechanic gates with the light. Also, the board includes a 32.768khz crystal to create a second oscillator for the clock time measurement.
You can watch the full Youtube video here:
Digital Sand Clock Controller
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(1)
More by Alvaro Gomez
-
Digital Sand Clock Controller
This is a controller for a Digital Sand Clock, using persistence of vision in combination with strob...
-
Header extension for 500W Spindle
This design provides a header extension to a generic 500W spindle for desktop CNCs. The header conta...
-
Training Board for PIC18F2550
This project implements a minimal training board for a PIC18F2550 microcontroller including switch i...
-
Programmable Mist Maker - XIAO / QT PY Extension
1221 2 1 -
RadioHAT - Raspberry Pi radio development platform
1028 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3439 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4068 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4466 2 2
