|
KiCADKicad
|
|
|
Autodesk Fusion 360Autodesk
|
FTDI to UPDI Converter
This device allows you to take in an FTDI connection with 6 pins and uses the GND, VCC, TXD, and RXD pins to convert the FTDI connection to a UPDI connection. It achieves that by connecting TXD to RXD with a 449 Ohms resistor.
Here is the link explaining how to do it created by SpenceKonde on Github:
https://github.com/SpenceKonde/AVR-Guidance/blob/master/UPDI/jtag2updi.md
This device is created according to SpenceKonde's descriptions and for the use of the MegaTinyCore Library that allows UPDI programming for ATtiny series microcontrollers.
FTDI to UPDI Converter
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Tuna Ozturk
-
Programmable Mist Maker - XIAO / QT PY Extension
1097 2 1 -
RadioHAT - Raspberry Pi radio development platform
914 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3345 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
3961 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4347 2 2
