|
|
DHT22 |
x 1 | |
|
|
Arduino_UNO_R3 |
x 1 | |
|
DFR0464DFRobot
|
x 1 |
|
KiCADKicad
|
Dry Box Sensor
This project was about creating a sensor with some spare parts I had laying around instead of buying a hygrometer from Amazon.
After picking up a cheap DHT22 sensor from my local electronics store, everything else was sourced from the Arduino Starter Kit that I had including the LCD screen.
Linked is a TikTok showing the project in action via a breadboard instead of a proper PCB
Dry Box Sensor
Project images are for reference only. Actual production is based on the manufacturing files on the project page.
Please review the designer's notes (e.g., PCB thickness) and select the appropriate options.
PCBWay is not responsible
for issues caused by unsuitable parameter selections.
For more important ordering information, please refer to
Read More
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(0)
- Likes(0)
More by Andrew Abotomey
-
Programmable Mist Maker - XIAO / QT PY Extension
1260 2 1 -
RadioHAT - Raspberry Pi radio development platform
1076 0 2 -
-
-
-
-
ARPS-2 – Arduino-Compatible Robot Project Shield for Arduino UNO
3475 0 6 -
A Compact Charging Breakout Board For Waveshare ESP32-C3
4124 3 8 -
AI-driven LoRa & LLM-enabled Kiosk & Food Delivery System
4503 2 2
